DWC_Authdata Modifier/Adder
#1
DWC_Authdata Modifier/Adder

NOTE: Outdated by my DWC_Authdata Spoofer which allows the user to put in any DWC_Authdata number they desire

It is much better to edit your DWC_Authdata within your nand instead of using this code if you are wanting to bypass a ban. More info can be found HERE

Also known as User ID Modifier/Adder. This code allows a user to ADD a desired value to their current DWC_Authdata/User ID. So let's say your DWC_Authdata (in hex) is 000002AAB83D71F0. And you decide to add 2A (in hex) for the code. Your new DWC_Authdata is 000002AAB83D721A.

Another thing to know, is that you can only make new FCs with your modified DWC_Authdata. If you use this code and connect online with an FC made on your 'legit' DWC_Authdata, you will receive error code 60000.

NTSC-U
C20ED36C 00000002
810601B4 3908XXXX
60000000 00000000

PAL
C20ED40C 00000002
810601B4 3908XXXX
60000000 00000000

NTSC-J
C20ED32C 00000002
810601B4 3908XXXX
60000000 00000000

NTSC-K
C20ED484 00000002
810601B4 3908XXXX
60000000 00000000

XXXX = Value ADDED to DWC_Authdata
XXXX = Any hex value from 1 - FFFF (1 - 65535 in decimal)

Source
lwz r8, 0x01B4 (r6) #Load value at Register 6 plus the offset of 0x01B4 and place it in Register 8
addi r8, r8, 0xXXXX #Add 0xXXXX to value in Register 8. Result is stored back into Register 8
nop #Necessary nop needed for odd amount of ASM instructions

Code created by: zak
Reply
#2
Outdated by my DWC_Authdata Spoofer which allows the user to put in any DWC_Authdata number they desire. Thread moved to incomplete/outdated forum
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)