How to Fill in X,Y,Z Values for Cheat Codes
#1
How to Fill in X,Y,Z Values for Cheat Codes

Tools Needed:
- Hex Calculator. Here's a good one - https://www.calculator.net/hex-calculator.html

This page will teach you how to fill in X,Y, and Z values of a code. For demonstration, we will be using the NTSC-U Remove Tagname code. You can find many many cheat codes in the Codes Forum HERE

A list of X,Y, and Z values can be found in this thread HERE

NTSC U Remove Tagname Code:
2834XXXX YYYYZZZZ
048A4414 2EDBE6FF
E0000000 00000000
2834XXXX YYYYZZZZ
048A4414 3F800000
E0000000 80008000

XXXX = Your Controller address, all XXXX values will differ depending on Player/Port 1 ,2 3, etc and what region your mkwii game is (NTSC-U, PAL, etc) For demo purposes, I will be using my GCN controller via port 1 for this code. Since the code is for NTSC-U, we will need the NTSC-U XXXX value for GCN port 1. That value is 3E80. Let's go plug in our XXXX values now.

28343E80 YYYYZZZZ
048A4414 2EDBE6FF
E0000000 00000000
28343E80 YYYYZZZZ
048A4414 3F800000
E0000000 80008000

The next step is to fill in the Z values. We will do the Y values last since there are two different methods for applying Y values. ZZZZ = Your Button values. These are region-free, but they differ depending on what controller you are using. Wii Wheel and Wii Chuck are the only controllers that share the same Z values. We want our Start button to activate the code and our L button to deactivate. ZZZZ value for Start button is 1080, and for L button is 00C0. Let's now plug in our ZZZZ values.

28343E80 YYYY1080
048A4414 2EDBE6FF
E0000000 00000000
28343E80 YYYY00C0
048A4414 3F800000
E0000000 80008000

It's time for the YYYY values. There are two methods to achieve the YYYY values depending on how you want to turn on/off your code(s).
Method #1 - Turning on/off your code while no other buttons are being pressed.
Method #2 - Turning on/off your code while other buttons are being pressed.
Method #1 is the easiest. You simply plug in 0000 for YYYY and you're done. Your completed code with method #1 looks like this...

28343E80 00001080
048A4414 2EDBE6FF
E0000000 00000000
28343E80 000000C0
048A4414 3F800000
E0000000 80008000

Method #2 requires a hex equation. That equation is YYYY = FFFF - ZZZZ. For Start button, our equation is FFFF - 1080 = YYYY. Use the hex calculator provided in the link. 

YYYY thus equals EF7F.

Do the same equation for the L button and your result for YYYY is FF3F. Plug in the Y values and you will have finished your code via Method #2.

28343E80 EF7F1080
048A4414 2EDBE6FF
E0000000 00000000
28343E80 FF3F00C0
048A4414 3F800000
E0000000 80008000

Also, here's our code using the same button value (Start Button) to activator and deactivate the code.

28343E80 EF7F1080
048A4414 2EDBE6FF
CC000000 00000000
048A4414 3F800000
E0000000 80008000

Congratz!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)