Graphical Speed-O-Meter
#1
Graphical Speed-O-Meter

Shout outs to Star & RiiDefi for Draw Text To Screen Code!

This code will display your vehicle speed as its own graphical image on the bottom left of your screen only during the race/battle. The image will not appear if you are not in a race/battle. Works everywhere.

NOTE: This code makes use of the following memory addresses...
0x80001660 thru 0x80001663
0x815F0000 thru 0x815F0003

Make sure no other codes in your GCT/Cheat-Manager are using those addresses.

NTSC-U
C200A3F0 00000007
9421FF80 BC610008
806DA358 80630044
80630000 3D808002
618C23E0 7D8803A6
4E800021 B8610008
38210080 80010014
60000000 00000000
C2009640 00000011
3D80815F 818C0000
2C0C0000 41820070
9421FF70 D8210008
BC610010 3D808000
816C1660 C02B0024
FC200A10 4CC63242
48000011 25332E30
66206B6D 2F680000
7CC802A6 38600009
388000DC 38A00001
3D808002 618C1DF0
7D8803A6 4E800021
3D808002 618C1DD0
7D8803A6 4E800021
B8610010 C8210008
38210090 81830000
60000000 00000000
C27E4C9C 00000007
3D80809C 818CD110
818C0020 540B103A
7D8C582E 818C0010
818C0010 3D608000
918B1660 3D80815F
93EC0000 807FEE20
60000000 00000000

PAL
C200A430 00000007
9421FF80 BC610008
806DA360 80630044
80630000 3D808002
618C2480 7D8803A6
4E800021 B8610008
38210080 80010014
60000000 00000000
C2009680 00000011
3D80815F 818C0000
2C0C0000 41820070
9421FF70 D8210008
BC610010 3D808000
816C1660 C02B0024
FC200A10 4CC63242
48000011 25332E30
66206B6D 2F680000
7CC802A6 38600009
388000DC 38A00001
3D808002 618C1E90
7D8803A6 4E800021
3D808002 618C1E70
7D8803A6 4E800021
B8610010 C8210008
38210090 81830000
60000000 00000000
C27EEFAC 00000007
3D80809C 818C18F8
818C0020 540B103A
7D8C582E 818C0010
818C0010 3D608000
918B1660 3D80815F
93EC0000 807F3618
60000000 00000000

NTSC-J
C200A38C 00000007
9421FF80 BC610008
806DA360 80630044
80630000 3D808002
618C23A0 7D8803A6
4E800021 B8610008
38210080 80010014
60000000 00000000
C20095DC 00000011
3D80815F 818C0000
2C0C0000 41820070
9421FF70 D8210008
BC610010 3D808000
816C1660 C02B0024
FC200A10 4CC63242
48000011 25332E30
66206B6D 2F680000
7CC802A6 38600009
388000DC 38A00001
3D808002 618C1DB0
7D8803A6 4E800021
3D808002 618C1D90
7D8803A6 4E800021
B8610010 C8210008
38210090 81830000
60000000 00000000
C27EE618 00000007
3D80809C 818C0958
818C0020 540B103A
7D8C582E 818C0010
818C0010 3D608000
918B1660 3D80815F
93EC0000 807F2678
60000000 00000000

NTSC-K
C200A538 00000007
9421FF80 BC610008
806DA380 80630044
80630000 3D808002
618C24E0 7D8803A6
4E800021 B8610008
38210080 80010014
60000000 00000000
C2009788 00000011
3D80815F 818C0000
2C0C0000 41820070
9421FF70 D8210008
BC610010 3D808000
816C1660 C02B0024
FC200A10 4CC63242
48000011 25332E30
66206B6D 2F680000
7CC802A6 38600009
388000DC 38A00001
3D808002 618C1EF0
7D8803A6 4E800021
3D808002 618C1ED0
7D8803A6 4E800021
B8610010 C8210008
38210090 81830000
60000000 00000000
C27DD36C 00000007
3D80809B 818CFF38
818C0020 540B103A
7D8C582E 818C0010
818C0010 3D608000
918B1660 3D80815F
93EC0000 807F1C58
60000000 00000000



List of Sources:
1st ASM (When Game loads StaticR.rel, Get Render Mode & Call Direct Print Setup Frame Buffer)

#~~~~~~~~~~~~~~~~#
# START ASSEMBLY #
#~~~~~~~~~~~~~~~~#

#

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
#       Register Notes:      #
# No need to backup r0 or LR #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

#~~~~~~~~~~~~~~~~~~~~~#
# Macros & Statements #
#~~~~~~~~~~~~~~~~~~~~~#

.macro push_stack
stwu r1, -0x80 (r1)
stmw r3, 0x8 (r1)
.endm

.macro pop_stack
lmw r3, 0x8 (r1)
addi r1, r1, 0x80
.endm

.macro call_link address
lis r12, \address@h
ori r12, r12, \address@l
mtlr r12
blrl
.endm

.macro default_instruction
lwz r0, 0x0014 (r1)
.endm

.set region, '' #Must set region value, or else source will not compile

.if (region == 'E' || region == 'e') # RMCE
.set nw4r_db_DirectPrint_SetupFB, 0x800223E0
.elseif (region == 'P' || region == 'p') # RMCP
.set nw4r_db_DirectPrint_SetupFB, 0x80022480
.elseif (region == 'J' || region == 'j') # RMCJ
.set nw4r_db_DirectPrint_SetupFB, 0x800223A0
.elseif (region == 'K' || region == 'k') # RMCK
.set nw4r_db_DirectPrint_SetupFB, 0x800224E0
.else # Invalid Region
.abort
.endif

#~~~~~~~~~~~~~~~~~~~~~~~#
# Start Register Safety #
#~~~~~~~~~~~~~~~~~~~~~~~#

push_stack

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Get Render Mode (RKSystem->mpVideo()->pRenderMode) #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

.if (region == 'E' || region == 'e') # RMCE
lwz r3, -0x5CA8(r13)
.elseif (region == 'P' || region == 'p') # RMCP
lwz r3, -0x5CA0(r13)
.elseif (region == 'J' || region == 'j') # RMCJ
lwz r3, -0x5CA0(r13)
.elseif (region == 'K' || region == 'k') # RMCK
lwz r3, -0x5C80(r13)
.endif

lwz r3, 0x0044(r3)
lwz r3, 0x0 (r3)

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Call nw4r::db: DirectPrint_SetupFB #
#         r3 = Render Mode           #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

call_link nw4r_db_DirectPrint_SetupFB

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# End Register Safety; Default Instruction #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

pop_stack
default_instruction

#

#~~~~~~~~~~~~~~#
# END ASSEMBLY #
#~~~~~~~~~~~~~~#

==========

2nd ASM (Take Float Speed, Convert It, Draw it to Screen)

#~~~~~~~~~~~~~~~~#
# START ASSEMBLY #
#~~~~~~~~~~~~~~~~#

#

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
#       Register Notes:      #
# No need to backup r0 or LR #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
#                                  Mem Address Notes:                                        #
#                             0x80001660 Speed Float Word                                    #
# 0x815F0000 "Status Word" If not zero, Draw Code will execute, auto clears after every race #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

#~~~~~~~~~~~~~~~~~~~~~#
# Macros & Statements #
#~~~~~~~~~~~~~~~~~~~~~#

.macro push_stack
stwu r1, -0x90 (r1)
stfd f1, 0x8 (r1)
stmw r3, 0x10 (r1)
.endm

.macro pop_stack
lmw r3, 0x10 (r1)
lfd f1, 0x8 (r1)
addi r1, r1, 0x90
.endm

.macro call_link address
lis r12, \address@h
ori r12, r12, \address@l
mtlr r12
blrl
.endm

.macro default_instruction
lwz r12, 0x0 (r3)
.endm

.set region, '' #Must set region value, or else source will not compile

.if (region == 'E' || region == 'e') # RMCE
.set nw4r_db_DirectPrint_Printf, 0x80021DF0
.set nw4r_db_DirectPrint_StoreCache, 0x80021DD0
.elseif (region == 'P' || region == 'p') # RMCP
.set nw4r_db_DirectPrint_Printf, 0x80021E90
.set nw4r_db_DirectPrint_StoreCache, 0x80021E70
.elseif (region == 'J' || region == 'j') # RMCJ
.set nw4r_db_DirectPrint_Printf, 0x80021DB0
.set nw4r_db_DirectPrint_StoreCache, 0x80021D90
.elseif (region == 'K' || region == 'k') # RMCK
.set nw4r_db_DirectPrint_Printf, 0x80021EF0
.set nw4r_db_DirectPrint_StoreCache, 0x80021ED0
.else # Invalid Region
.abort
.endif

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
#       Check to See if a Race is Active:       #
#         Load Status Word from Mem 81          #
# If not zero, we know to execute the Draw Code #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

lis r12, 0x815F
lwz r12, 0x0 (r12)
cmpwi r12, 0x0
beq- dont_execute

#~~~~~~~~~~~~~~~~~~~~~~~#
# Start Register Safety #
#~~~~~~~~~~~~~~~~~~~~~~~#

push_stack

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Pointer Load; Float Load, Conversion, Storage #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

lis r12, 0x8000 #Set 1st Half Address of Exception Vector Area
lwz r11, 0x1660 (r12) #Load Pointer into r11
lfs f1, 0x0024 (r11) #Load the Speed Float from Pointer into Float Register 13
fabs f1, f1 #Handle negative values
crset 4*cr1+eq #Set the Condition Register before the Float Arg is used in DirectPrint Printf

#~~~~~~~~~~~~~~~~~~~~~#
# Create ASCII String #
#~~~~~~~~~~~~~~~~~~~~~#

bl the_string #Create the C++ string

.llong 0x25332E3066206B6D #Hex for "%3.0f km/h"
.long 0x2F680000

the_string:
mflr r6 #Set 4th Arg of DirectPrint Printf

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
#              DirectPrint Printf & Store Cache               #
#                 Purpose: Draw on Screen                     #
#             r3 = X coordinate (starts far left)             #
#           r4 = Y coordinate (starts at very top)            #
#                 r5 = 0 No Wrap; 1 Wrap                      #
# r6 = Address Pointer to String that will be Drawn on Screen #
#               r7 thru r10 printf format args                #
#            f1 thru f13 printf float format args             #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

li r3, 0x9 
li r4, 0xDC
li r5, 0x1

call_link nw4r_db_DirectPrint_Printf
call_link nw4r_db_DirectPrint_StoreCache

#~~~~~~~~~~~~~~~~~~~~~#
# End Register Safety #
#~~~~~~~~~~~~~~~~~~~~~#

pop_stack

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# dont_execute label; Default Instruction #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

dont_execute:
default_instruction

#

#~~~~~~~~~~~~~~#
# END ASSEMBLY #
#~~~~~~~~~~~~~~#

==========

3rd ASM (Store Memory Pointer)
#~~~~~~~~~~~~~~~~#
# START ASSEMBLY #
#~~~~~~~~~~~~~~~~#

#~~~~~~~~~~~~~~~~~~~~~#
# Macros & Statements #
#~~~~~~~~~~~~~~~~~~~~~#

.set region, '' #Must set region value, or else source will not compile

.if (region == 'E' || region == 'e') # RMCE
.macro default_instruction
lwz r3, -0x11E0 (r31)
.endm
.macro set_playerbase
lis r12, 0x809C
lwz r12, 0xFFFFD110 (r12)
.endm
.elseif (region == 'P' || region == 'p') # RMCP
.macro default_instruction
lwz r3, 0x3618 (r31)
.endm
.macro set_playerbase
lis r12, 0x809C
lwz r12, 0x18F8 (f12)
.endm
.elseif (region == 'J' || region == 'j') # RMCJ
.macro default_instruction
lwz r3, 0x2678 (r31)
.endm
.macro set_playerbase
lis r12, 0x809C
lwz r12, 0x0958 (r12)
.endm
.elseif (region == 'K' || region == 'k') # RMCK
.macro default_instruction
lwz r3, 0x1C58 (r31)
.endm
.macro set_playerbase
lis r12, 0x809B
lwz r12, 0xFFFFFF38 (r12)
.endm
.else # Invalid Region
.abort
.endif

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Set Region-Specific Player-Base #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

set_playerbase

#~~~~~~~~~~~~~~~~~~~~~~~#
# Pointer Level Loading #
#~~~~~~~~~~~~~~~~~~~~~~~#

lwz r12, 0x0020 (r12) #Load Word from 1st Level Pointer

slwi r11, r0, 2 #Shift the bits of r0 by 2 to the left, result in r11. This is the same as multiplying by 0x4. r0 is current player slot.

lwzx r12, r12, r11 #Load into 2nd Level Pointer
lwz r12, 0x0010(r12) #Load into 3rd Level Pointer
lwz r12, 0x0010(r12) #Load into 4th Level Pointer

#~~~~~~~~~~~~~~~~~~~~~#
# Store Final Pointer #
#~~~~~~~~~~~~~~~~~~~~~#

lis r11, 0x8000 #Set up 1st Half Address of Exception Vector Area
stw r12, 0x1660 (r11) #Store Pointer Address to 0x80001660

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Set Status Word in Mem81 for Draw Text ASM #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

lis r12, 0x815F #Set up 1st Half Address of dynmaic Mem81
stw r31, 0x0 (r12) #Store r31 to 0x815F0000, we simply need a value not zero to be stored here. This will make the Speed Bar ASM only trigger during races.

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#
# Default Instruction; Region-Specific #
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~#

default_instruction

#

#~~~~~~~~~~~~~~#
# END ASSEMBLY #
#~~~~~~~~~~~~~~#



Code creator: zak
Code credits: Star & RiiDefi (Draw Text To Screen Code); SwareJonge (Speed-O-Meter); Chadderz (source fixes to Mdmwii's OG Speed source); Mdmwii (original Speed-O-Meter)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)